The hose crimping vise is used for crimping hoses permanently onto hose tails etc.
The vise has mounting holes for permanent installations or it may be used as a portable tool for hose assembly in the field.
A full range of hose ferrules is also available.
The ‘ferrule id (mm)’ shown in the table below is the inside diameter of the ferrule before it is crimped. The ‘hose id (mm)’ is an indication of what hose size it might suit.
|No. of dies||5|
|Sizes:||0.48″, 0.53″, 0.58″, 0.63″, 0.68″|
|Ferrule Length:||25.4mm (all sizes)|