High efficiency oil removal filter from Hankison for coalescing fine water and oil aerosols. Removes solid particles to 0.01 micron (less than or equal to 0.01mg/m3 remaining oil content). Features corrosion resistant inner and outer cores.
This filter is designed to be used in the following situations:
*Upstream of dessicant or membrane dryers.
*Downstream of refrigerated dryers.
*Downstream of pressure-swing dessicant dryers for fine particulate removal.
*At point-of-use (may be used if light liquid load is present).
Features Two Stage Filtration as follows:
First Stage – Multiple layers of fibre media and media screen remove larger particles, pre-filtering the air for the second stage.
Second Stage – Multiple layers of bonded, blended fibre media for fine coalescence with an outer coated closed cell foam sleeve.
These filters conform to ISO Quality Standard 8573-1:1995. Please refer to the attached data sheet for a full explanation.
To find the maximum flow at pressures other than 7 bar, please consult the pressure correction table at the end of the attached datasheet.
All filters are supplied with a differential pressure gauge. Automatic drains are included up to F17-B-HF only.
Filters are available with connection sizes of 1/4″ BSP to 3″ BSP and DN 80 to DN 150 flange.
Element(s) is(are) included with the filter. Larger filters require more than one element.
To order spare elements please use the link below and the part number and qty shown. For example: HF-04 x 1 means 1 off element part number HF-04 is required for this filter.
This range supersedes HF5 filter from Hankison which has been discontinued (March 2010).
A modular connection kit for joining two filters and a wall mounting bracket can be ordered separately.